Model:Tiburon/Coupe | Model year: 2003-4 | Mileage:28414 |
Displacement: 2000cc | Fuel :Gasoline | T/A Auto: |
C code:improper Tightening | N code: Impossible to Start(hold to 3rd Gear. | System main harness |
- Automatic Transaxle 3rd gear hold and poor Engine power
- Poor ground contact of the ATM control relay.
- Scan tool check.
=Diagnostic Trouble Code.
DTC | Diagnostic Item |
P1723 | ATM control relay open/short circuit to ground. |
- Inspect the parts of Engine control relay.
=Inspect the resistance of the coil:85 ohms (normal)
=Inspect the contact point of the ATM control relay Terminal (normal). - Inspect the power source and the ground line inputted to control relay using test lamp and multi meter.
=Measure the voltage inputted to C37 connector # 1 pin.
=12.3 V (Normal)
=Inspect the c37 connector #2 pin ground line using test lamp.
=The test lamp is not Turn “ON'”: Abnormal. - Check for open circuit of wire C37 connector #2 pin to 18 ground point using ohm meter- 0 ohms(Normal)
- Inspect the G18 ground point.
- Repaint the wiring ground terminal.
- more study
0 comments:
Post a Comment